Adapters FAQ
Which OBD adapter to buy, how adapters are scored and why some are faster.
8 questions
An ELM327-compatible OBD-II adapter that uses Bluetooth LE, often sold as Bluetooth 4.0, BLE or "for iPhone", plugged into the OBD port under your dashboard. No special or proprietary hardware is needed.
Adapters that use classic Bluetooth or Wi-Fi look the same but do not work: see Why does Autocast only work with Bluetooth LE adapters? below. The What you need page lists the adapters that score best on members' drives.
OBD adapters come in three kinds: Bluetooth LE (Bluetooth 4.0, BLE or "for iPhone"), classic Bluetooth and Wi-Fi. Autocast works with Bluetooth LE adapters only, because:
- An iPhone cannot use a classic Bluetooth adapter. iOS only lets apps talk to Bluetooth LE accessories. A classic adapter (often "Bluetooth 2.0", paired with a PIN like 1234) works with Android phones and computers, and may even appear in the iPhone's Bluetooth settings, but no iPhone app can use it.
- Recording keeps going in the background. iOS lets the app stay connected to a Bluetooth LE adapter while it is in the background or your phone is locked, so a drive keeps recording. It gives apps no way to keep a Wi-Fi adapter connected in the background, so recording would stop whenever the app left the screen.
- Your phone stays online. With a Wi-Fi adapter your phone has to join the adapter's own Wi-Fi network, which has no internet, so maps and uploads depend on mobile data taking over.
- It is easier on your vehicle. A Bluetooth LE adapter connects by itself when you get in and uses very little power; many Wi-Fi adapters never sleep and can flatten a vehicle battery if left plugged in.
If the box or listing does not say Bluetooth 4.0, BLE or iPhone, it probably will not work. The Adapters page has photos of adapters known not to work.
Look at the Adapters page, choose the vehicle you will use it with, and pick one with a high score on that model, from several activities. Prefer an adapter that combines requests (multi-PID): it reads several values in one request and gets far more readings a second. It must be Bluetooth LE.
Each adapter is scored out of 100 against the others, from three parts: speed (how quickly it answers, against the typical time for the same commands on the same protocol), coverage (how many of the vehicle's commands it reaches, against vehicles on the same ECU or model) and compatibility (requests without timeouts or failures, recordings without disconnects, and how many protocols it has worked on).
Scores are relative, so the activity count beside each shows how much evidence stands behind it. The band on the speed bar shows how much an adapter's speed varies from one activity to the next.
Mostly multi-PID: an adapter that combines up to six values into one request gets about six readings back for each round trip, while one that asks for a value at a time gets one. In our own tests on one vehicle, adapters that combined requests returned 36 to 79 readings a second and those that did not returned 5 to 9. How quickly each request is answered varies too, by up to about 2.5 times between adapters.
Each figure with a known good range is shaded green (good), amber (fair) or red (poor), with an icon beside it; hover over a figure to see its bands. Requests, responses per second and average latency are not rated, because they depend on the program and the protocol.
The adapter reports an ELM327 version mostly reported by inexpensive copies of the original chip (v1.5 and v2.1). Many work, but they are a common source of slow or missing answers, so check the adapter's score before relying on one.
Yes. Signed in, open the adapter on the Adapters page and choose Add photo, so others can recognise it. Photos are stored without their location and camera details, and you can delete your own.
Still have a question? Write to us and we'll get back to you.